PULSElectronic (Turkey)

Pulselectonic specializes in electrostatic treatment units and accessories for the paper and plastic industries and provides top quality products for a reasonable price.     Website


Catalogues

Static Measuring
Analysis of static problems are very hard without measurement of static charge. A decent static meter supplies the possibility of analysis of the problem to the technician. Static meter displays where and how the static current is generated and its polarization and amplitude If a static charge preventer is needed in the problem, static meter determines the best position for static charge preventer and displays its performance.

SF 156 Static Meter
To analyze and solve the static troubles without measuring the charge is very complicated. So utilization of static meter will be a good decision for technical personnel to solve troubles caused by static electricity. Static meter shows amplitude and polarity of static electricity and where and how it was generated. It is quick to expose positive and negative loads up to 160.000 Volts. If to solve trouble the static eliminator is needed, static meter will rate the most appropriate position for static eliminator and show its performance. Static meter forms standards due to that would be solved future static troubles and enhanced work of technical personnel. These standards are varied from charging level of dangerous areas to charging level of ordered, produced or sent to client product. Its accuracy, stability of easement in use and convenient size of device make Puls static meter an ideal instrument for engineers.
Charging Bonding
Charging generation systems 3kV-20kV & 0-740uA, DC charging bars, Perforation detectors with a capacity of 900 pcs/min with an adjustable output voltage between 6kV-21kV.

Static Charging Generator 20kV
HVDC 2000 Charging Generator is suitable for high voltage applications in industry and for DC powered bars. The unit output voltage and protection current value are set digitally by using the front panel. The output voltage can be set between 3kV-20kV and current can be set between 0-740uA. The power supply includes remote on/off and remote voltage andjustment settings and is available as positive or negative.
Static Charging Generator 30kV
Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit's output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-30kV and as to current it is between 0 - 5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.
Catalogue is currently unavailable.
Static Charging Generator 60kV
Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit's output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-60kV and as to current it is between 0 - 2,5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.
Catalogue is currently unavailable.
Static Charging Generator 100kV
Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit's output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-100kV and as to current it is between 0 -1,5mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.
Catalogue is currently unavailable.
Static Charging Generator 120kV
Static Charging Generator is appropriate for high voltage applications and for powered bars. The unit's output voltage and protection current value are digitally set by using front panel. The output voltage can be set between 0kV-120kV and as to current it is between 0 -1,25mA. The power supply includes remote on/off and remote voltage adjustment settings and also can produce both positive and negative charges.
Catalogue is currently unavailable.
Static Charging Bar
Puls Charging Bar device is utilized in industry for sticking materials to any surface or to each other. The sticking should be without any defects so then the materials are being unstuck, they should not damage the surface of the material. By utilizing Puls Charging Bar high resistant materials such as paper or plastic now can be easily clamped to surface. By using ionization system electrostatic charging generates the charger system by means of static generator and charging bar. Charging bar is also designed to use charging in some quantity. Due to resistant connection to high voltage it does not emit a spark and enhances safety of work. Power supply voltage should be adjusted according to positive and negative polarity of charging bar. In sticking application charging bar should keep the distance to being charged materials in 10-20 mm. Puls charging bar has an aperture behind, which by putting inside of it a plastic bar with M8 x 60 size, supplies simple and safe installation to any machine. To make static charge and sticking applications work properly it is necessary by using the most proper ionizing system to provide neutralization before two materials would be stuck to each other.
Perforation Detector
Puls Perforation Detector is used to detect perforation on any material in packaging industry. Especially it is useful in bag making machinery to count the bag numbers by detecting and reporting the perforation. Its detection capacity is 900 pcs/min. Output voltage can be adjusted between 6kV-21 kV by rotating and fixing the knob on the front panel. The leds on the front panel show the high voltage level. If perforation is detected, the count led flashes. The high voltage bar or probe with one emitter pin is connected to the output of the equipment and it is mounted above the web moving on grounded surface. If a spark occurs from the high voltage bar to the earth via perforation, detector will report it by a 30 msn opto coupler pulse output.
IML Foam
High Tension Strength (IML Foam) used on the front face of static loading apparatuses is produced only by PULSElectronic and is applied in its own devices as well as presented to other users occupied with the same area. Given below porper utilization of the IML Foam supplies a long-time work without causing any problem.
Catalogue is currently unavailable.
5-Pin IML Head
It is necessary to have the tag to fit the mould while the production of In-Moulding applications is in process. Due to the high performance of the 5 PIN IML titanium needles, the tag gets glued to the mould without problems. The static electricity being loaded on the tag due to the 5 PIN IML titanium needles provides perfect loading on the tag surface and especially on the head without causing any distortion or trail.
Catalogue is currently unavailable.
DC High Voltage Distributor
High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.
Connection: Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.
Catalogue is currently unavailable.
Static Elimination
Anti-static bars, Ionizing air-guns, Power units, Ionizing air-blowers/nozzles / air-knives.

Anti Static Bar
Due to high technologically design used in Anti-static bar it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Anti-static bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti-static bar will supply machines to perform hygienic, safe and qualitative production. Anti-static bar can be designed in different lengths to satisfy the requirements of needs of application. Antistatic bar separates the air molecules to positive and negative ions. Due to principle of work of antistatic bar the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length.
Anti Static Gun
Ionized Air gun is a hand-held ionizing air gun for neutralization static charge and removing dust contamination of industrial applications. Air gun separates air molecules into positive and negative ions by means of electric field, then generates and transports them. Due to high-technologically design it is possible to produce more efficient results for static electric troubles even in high=speed applications. It provides high performance and efficient ionization with fast discharging time. Anti-static air gun separates the air molecules to positive and negative ions. Due to principle of work of anti-static air gun the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Anti-static air gun does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical shock. Air passing trough anti-static air gun must be clean and dry. Due to being ergonomic and lightweight anti-static air gun supplies soft and effective work.
GK75/A02 Power Supply
Power Supply is source with high voltage generator designed for devices of active ionization. It can be one or two-fan. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar. There is a protection card inside of it for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply. Due to high technologically design used in Power Supply it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Power Supply does not need any calibration and can be cleaned and cared easily. Using Power Supply will supply machines to perform hygienic, safe and qualitative production. Power Supply can be designed in different lengths to satisfy the requirements of needs of application.
GK75A Power Supply
Power Supply is source with high voltage generator designed for devices of active ionization. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar. There is a protection card inside of Power Supply for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
100Hz Power Supply
PULS 100HZ Power Supply is used in fast running machines in combination with tandem ionizing bars. Any surface charges that might disrupt production will be reliably and effectively removed - even at high speed operations- by using the ionizing unit. Tandem ionizing bars are also suitable for machine with speed of 150m/min.
Catalogue is currently unavailable.
Single Anti Static Blower
Single anti-static blower with one fan is designed to neutralize the static charges over a large area. Due to high technology used in design it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Single anti-static blower comprises an integrated fan system for increasing ionization distance and supplying enough air flow. Air flow can be adjusted to suit specific application with variable fan speed. It provides high performance and efficient ionization with fast discharging time. Single anti-static blower separates air molecules to positive and negative ions by the electric field it generates and then transport them in the direction of charged objects by the air apparatuses.It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Single anti-static blower does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. It can be installed in restricted places. Single anti-static blower's filters must be purified in defined space of time.
Dual Anti Static Blower
Dual anti-static blower with coupled fan is designed to neutralize the static charges over a large area. Due to high technology used in design it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Dual anti-static blower comprises an integrated fan system for increasing ionization distance and supplying enough air flow. Air flow can be adjusted to suit specific application with variable fan speed. It provides high performance and efficient ionization with fast discharging time. Dual anti-static blower separates air molecules to positive and negative ions by the electric field it generates and then transport them in the direction of charged objects by the air apparatuses.It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Dual anti-static blower does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. It can be installed in restricted places. Dual anti-static blower's filters must be purified in defined space of time.
Static Control Nozzles
Static control nozzles are designed to neutralize high static charge in those industrial applications where anti -static bar cannot be mounted. Due to its ergonomic and light structure, nozzle is simple, soft and efficient in its use. Static control nozzles provide effective ionization when the air molecules are separated to positive and negative ions. Due to principle of work the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Static control nozzles do not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Static control nozzles are connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. Air passing trough static control nozzles must be clean and dry. Static control nozzles due to being ergonomic and lightweight supply soft and effective work.
Blower Driven Air Boost Bar
Blower driven anti-static bar is connected to air apparatus designed to neutralize the static charges which cause troubles at large distances. Due to high technology used in design it became possible to produce more efficient results for solution of static electric troubles even in high speed applications. It provides high performance and efficient ionization with fast discharging time. Anti-static bar separate air molecules to positive and negative ions by the electric field, generate and then transport them in the direction of charged objects by the air apparatuses. Any statically charged product passed through the efficient distance of the bar will attract the opposite charged ions and neutralize the product. That will prevent sticking of product to other product or parts of machines. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Blower driven anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Blower driven anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. Air passing trough blower must be clean and dry. It can be installed in restricted places. According to application it can be produced in different length.
Compressed Driven Air Boost Bar
Compressor driven anti-static bar is connected to air apparatus designed to neutralize the static charges which cause troubles at large distances. Due to high technology used in design it became possible to produce more efficient results for solution of static electric troubles even in high speed applications. It provides high performance and efficient ionization with fast discharging time. Compressor driven anti-static bar separates air molecules to positive and negative ions by the electric field, generate and then transport them in the direction of charged objects by the air apparatuses. Any statically charged product passed through the efficient distance of the bar will attract the opposite charged ions and neutralize the product. That will prevent sticking of product to other product or parts of machines. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Compressor driven anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life. Compressor driven anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. Air passing trough compressor must be clean and dry. It can be installed in restricted places. According to application it can be produced in different length.
AC High Voltage Distributor
High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.
Connection: Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.
Catalogue is currently unavailable.